Hi experts,

As you know, without a SLP, if one policy usually complete snapshot and backup from snapshot in one time.

If backup job faild, it will remove the snapshot.

Also, we can choose "Snapshot only" on schedule tab, but user need mount the snapshot volume manually and initiate backup, not convinient.

So, could someone show me how to seperate Snapshot and Backup from snapshot jobs without SLP?

Many thanks!

BTW, since my SLP configuration for my MS SQL policy met problem (said MS SQL Policy type is not compatible with SLP, default appliacation schedule is not compatible with SLP.), bpdbm log attached FYI.

Hopefully experts can help me out~~

Thanks.

Just wondering how many people use this setting and if they've seen any benefits from it.

Thanks,

Does anyone have a NetBackup Master 7.5.x running on Solaris 11 LDOM? i know it supported but will there be bugs?

New install of a Master Server and 2 media servers using Solaris 11 Zones Netbackup 7.5.0.4

Example:

Media Server ( Media_1 ) installed on a Global Zone

Master Server ( Master_1 ) installed on the local zone which is the same physical server as Media_1

New Physical server has ( Media_2) on a Global Zone

This all works fine until you shut down the Netbackup daemons on the Media_1 server ,

Part of the ( netbackup ) shutdown script will run a ps -ea and grep for nbemm and shutdown the master servers nbemm.,

The reason is the script does not defined if the process_id is running on the local or global zone,.

In the above example the netbackup ( ps -ea | grep nbemm ) finds only process_id of nbemm and kills it

This proccess_id is actually in the local zone so it kills the masters nbemm.

Questions:

1) Do we support this example. We do state we Symantec Supports a master server is a local zone., How about a master and media server on a physical server using the global and local zones.

2) If this is support is there a way to change the ( netbackup ) start/stop switch so the ps -eaZ command will be used to select the correct zone when killing process ids .
 

KB 2709236 on Microsoft's website reveals that "0x00000050 Stop error when Windows tries to back up registry hives on a computer that is running Windows Vista SP2 or Windows Server 2008 SP2"

Hotfix is available.
This was causing problems for us when we did Open File Backups.

Hi all,

I got status 1 when doing catalog backup which store in a media server's staging. When I look into the bpbkar directory in master server, I find it didn't generate any log. I have enable the logging to 5 and also try with "bpbkar32 -nocont c:\ > nul 2>temp.f" on windows(master) but it return to command prompt immediate and still nothing under bpbkar.

Can someone help me resolve it....

Dear All , 

   I have a client with Linux installed which I wanted to configure the backup over SAN for it when I began starting the steps for the SAN configuration I found that ths client name is found in the SAN Clients tab in the administration GUI interface but when right click to view FT connctions , I found nothing and when I check the details of the backup jobs taken from this server I found that the backup is still being taken on LAN from the transport type which was LAN and because when I read in the details I found this error FT client No Device configured 

so I went to the client and found the tape library was correctly configured and the Client can see the tape library and its two tape drives 

When I go to the administration console I can't find any FT media servers configuered so what I feel that the engineer before me tried to configure the SAN media server but he did a wrong steps or he mixed steps from both SAN media server and SAN Client 

so can any one give some recommedations like how can I check on the san media server license prescence ? like what are the steps for configuring the media servers and how to use this linux system as a SAN media server ? wether it's better to be used as a SAN media server or as SAN Client ? what is the exact name for the SAN Media server license because I can't find any with this name in the license administration console ? I ony find SAN Client , Full Enterprise server , Remote Media Server

The netbackup master server is 7.5 & installed on Solaris 10 and the client on Linux is 7.5 

Thanks & Best Regards,

    Mahmoud

For Client Side Encryption option, It is required to have the client running the same version of NetBackup as the master server. It is also recommended to have them patched to the same level.

We are upgrading NetBackup Master from 7.0.1 to 7.5.0.4 and for interim period the Master Server, Media Servers and clients will be on different versions.

How will NetBackup react for client side encrypted backups if:

   Master Server and Client have different Versions

   Master Server and Media Server have different Versions

   Media server and client have different versions

Hi,

Can someone explain me where -T (uppercase T) switch stands for in the bpclimagelist command?

In the documentation they are only speaking off a -t (lowercase t) switch which gives me an entirly other result.
 

I was having problems during a BMR test restore. The BMR restore always ended with "failed to verify backup rc 227".I did found the reason for this error but I was looking up more information about the bpclimagelist command.

So can anyone tell me more about the undocumented -T switch?

Regards,
Erwin

Backing up SQL Server 2000 db (don't ask).  NetBackup SQL Client connects to one instance on the server works fine.  Connection to other instance fails.  No problems with either in Enterprise manager.  Before I bounce this back at the DBAs, I want to make sure it's not an NBU problem.

NBU Server - Windows 2008 R2

Client Server Windows 2003

DBClient log

00:00:11.396 [3756.2204] <2> vnet_pbxConnect: pbxConnectEx Succeeded
00:00:11.396 [3756.2204] <2> logconnections: BPRD CONNECT FROM 172.22.23.50.2269 TO 172.26.1.80.1556 fd = 452
00:00:11.615 [3756.2204] <4> CGlobalInformation::VCSVirtualNameList: INF - Veritas Cluster Server is not installed.
00:00:11.615 [3756.2204] <1> CGlobalInformation::VCSVirtualNameList:     CONTINUATION: - The system cannot find the path specified.
00:00:11.631 [3756.2204] <4> getServerName: Read server name from nb_master_config: us-bak-01
00:00:11.631 [3756.2204] <4> CDBIniParms::CDBIniParms: INF - NT User is SYSTEM
00:00:11.834 [3756.2204] <4> DBConnect: INF - Logging into SQL Server with DSN <NBMSSQL_3756_2204_1>, SQL userid <sa> handle <0x01d23380>.
00:00:28.725 [3756.2204] <4> DBConnect: INF - Logging into SQL Server with DSN <NBMSSQL_3756_2204_1>, SQL userid <sa> handle <0x01d244a0>.
00:00:45.413 [3756.2204] <4> CGlobalInformation::CreateDSN: INF - Error Creating ODBC data source name
00:00:45.413 [3756.2204] <1> CGlobalInformation::CreateDSN:     CONTINUATION: - Component not found in the registry
00:00:45.429 [3756.2204] <2> vnet_pbxConnect: pbxConnectEx Succeeded
00:00:45.429 [3756.2204] <2> logconnections: BPRD CONNECT FROM 172.22.23.50.2290 TO 172.26.1.80.1556 fd = 584
00:00:45.476 [3756.2204] <16> CDBbackmain::LoadUserLogin: ERR - Internal error. See the dbclient log for more information.
00:00:45.507 [3756.2204] <2> vnet_pbxConnect: pbxConnectEx Succeeded
00:00:45.507 [3756.2204] <2> logconnections: BPRD CONNECT FROM 172.22.23.50.2291 TO 172.26.1.80.1556 fd = 588
00:00:45.554 [3756.2204] <32> CDBbackmain::LoadUserLogin: ERR - Error 1 has been returned from GetCurrentDSN
00:00:45.585 [3756.2204] <4> CDBbackmain::dbbackup: INF - Results of executing <C:\Program Files\Veritas\NetBackup\DbExt\MsSql\CONFIG-DIFF1.bch>:

<0> operations succeeded. <0> operations failed.
00:00:45.601 [3756.2204] <2> vnet_pbxConnect: pbxConnectEx Succeeded
00:00:45.601 [3756.2204] <2> logconnections: BPRD CONNECT FROM 172.22.23.50.2292 TO 172.26.1.80.1556 fd = 476
00:11:21.902 [5524.4552] <2> vnet_pbxConnect: pbxConnectEx Succeeded
00:11:21.902 [5524.4552] <2> logconnections: BPRD CONNECT FROM 172.22.23.50.2313 TO 172.26.1.80.1556 fd = 448
00:11:22.184 [5524.4552] <4> CGlobalInformation::VCSVirtualNameList: INF - Veritas Cluster Server is not installed.
00:11:22.184 [5524.4552] <1> CGlobalInformation::VCSVirtualNameList:     CONTINUATION: - The system cannot find the path specified.
00:11:22.184 [5524.4552] <4> getServerName: Read server name from nb_master_config: us-bak-01
00:11:22.184 [5524.4552] <4> CDBIniParms::CDBIniParms: INF - NT User is SYSTEM
00:11:22.199 [5524.4552] <4> DBConnect: INF - Logging into SQL Server with DSN <NBMSSQL_5524_4552_1>, SQL userid <sa> handle <0x01d23380>.
00:11:38.903 [5524.4552] <4> DBConnect: INF - Logging into SQL Server with DSN <NBMSSQL_5524_4552_1>, SQL userid <sa> handle <0x01d244a0>.
00:11:55.591 [5524.4552] <4> CGlobalInformation::CreateDSN: INF - Error Creating ODBC data source name
00:11:55.591 [5524.4552] <1> CGlobalInformation::CreateDSN:     CONTINUATION: - Component not found in the registry
00:11:55.591 [5524.4552] <2> vnet_pbxConnect: pbxConnectEx Succeeded
00:11:55.591 [5524.4552] <2> logconnections: BPRD CONNECT FROM 172.22.23.50.2334 TO 172.26.1.80.1556 fd = 580
00:11:55.653 [5524.4552] <16> CDBbackmain::LoadUserLogin: ERR - Internal error. See the dbclient log for more information.
00:11:55.669 [5524.4552] <2> vnet_pbxConnect: pbxConnectEx Succeeded
00:11:55.669 [5524.4552] <2> logconnections: BPRD CONNECT FROM 172.22.23.50.2335 TO 172.26.1.80.1556 fd = 584
00:11:55.716 [5524.4552] <32> CDBbackmain::LoadUserLogin: ERR - Error 1 has been returned from GetCurrentDSN
00:11:55.716 [5524.4552] <4> CDBbackmain::dbbackup: INF - Results of executing <C:\Program Files\Veritas\NetBackup\DbExt\MsSql\CONFIG-DIFF1.bch>:

<0> operations succeeded. <0> operations failed.
00:11:55.732 [5524.4552] <2> vnet_pbxConnect: pbxConnectEx Succeeded
00:11:55.732 [5524.4552] <2> logconnections: BPRD CONNECT FROM 172.22.23.50.2336 TO 172.26.1.80.1556 fd = 472
 

NBU Activity Monitor

2/27/2013 12:11:14 AM - Info nbjm(pid=5572) requesting MEDIA_SERVER_WITH_ATTRIBUTES resources from RB for backup job (jobid=293261, request id:{16EEBAD0-18DC-4F17-81A9-F5C95776BBCB})  
2/27/2013 12:11:14 AM - requesting resource LON-CORP2
2/27/2013 12:11:14 AM - requesting resource us-bak-01.shl.prod.NBU_CLIENT.MAXJOBS.lonsql2722.group.shlroot.local
2/27/2013 12:11:14 AM - requesting resource us-bak-01.shl.prod.NBU_POLICY.MAXJOBS.LONSQL2722-SUNCONFIG-DIFF
2/27/2013 12:11:14 AM - granted resource us-bak-01.shl.prod.NBU_CLIENT.MAXJOBS.lonsql2722.group.shlroot.local
2/27/2013 12:11:14 AM - granted resource us-bak-01.shl.prod.NBU_POLICY.MAXJOBS.LONSQL2722-SUNCONFIG-DIFF
2/27/2013 12:11:14 AM - granted resource LON-CORP2
2/27/2013 12:11:14 AM - estimated 0 Kbytes needed
2/27/2013 12:11:14 AM - Info nbjm(pid=5572) started backup job for client lonsql2722.group.shlroot.local, policy LONSQL2722-SUNCONFIG-DIFF, schedule SUNCONFIG-DIFF on storage unit LON-CORP2
2/27/2013 12:11:16 AM - started process bpbrm (7072)
2/27/2013 12:11:19 AM - Info bpbrm(pid=7072) lonsql2722.group.shlroot.local is the host to backup data from     
2/27/2013 12:11:20 AM - Info bpbrm(pid=7072) reading file list from client        
2/27/2013 12:11:20 AM - connecting
2/27/2013 12:11:25 AM - Info bpbrm(pid=7072) starting bphdb on client         
2/27/2013 12:11:25 AM - Info bphdb(pid=3712) Backup started           
2/27/2013 12:11:25 AM - connected; connect time: 00:00:05
2/27/2013 12:11:59 AM - Info dbclient(pid=5524)     CONTINUATION: - Component not found in the registry
2/27/2013 12:11:59 AM - Info dbclient(pid=5524) ERR - Internal error. See the dbclient log for more information.  
2/27/2013 12:11:59 AM - Info dbclient(pid=5524) INF - Results of executing <C:\Program Files\Veritas\NetBackup\DbExt\MsSql\CONFIG-DIFF1.bch>:      
2/27/2013 12:11:59 AM - Info dbclient(pid=5524) <0> operations succeeded. <0> operations failed.       
2/27/2013 12:12:19 AM - Error bpbrm(pid=7072) from client lonsql2722.group.shlroot.local: ERR - command failed: none of the requested files were backed up (2)
2/27/2013 12:12:20 AM - Error bpbrm(pid=7072) from client lonsql2722.group.shlroot.local: ERR - bphdb exit status = 2: none of the requested files were backed up
2/27/2013 12:12:22 AM - Error bpbrm(pid=7072) cannot send mail to hank.hill@shl.com,dev.krishna@shl.com        
2/27/2013 12:12:24 AM - end writing
none of the requested files were backed up(2)

HI,

Recently tapes imported to our environment from other environment, import successful

backup is encrypted

trying to do restore, and restore is failing with "tar encounted on an error 184"

got the Pass phrase and trying to insert, and its failing with following error

../bpkeyutil.c.371: Main : Function call RemoteCopy (Client host name) failed. Errno = 0

Master server and media server

Linux 

nbu 7.1

client 

windows 2003 

nbu 7.1

Windows 2008r2 environment, NBU 7.5.0.4, using Vault and SLP duplication.

Hi all,

Due to contractual obligations, some of my backups require duplication from our primary disk storage (datadomain) to our secondary datadomain. But, a third copy must be sent offsite on tape. I feel that this is an antiquated process, but I have to do it. 

Currently, I use SLP to duplcate the data from the primary disk to the secondary disk across town through our metro e connection. Also, I have the same policy set up in a the vault profile to duplicate the original back over to tape once the backup to primary disk completes. I know that SLP can handle all of this by itself, but I have had very bad issues with using SLP to duplicate data to tape in our high volume environment. My question is, how does Netbackup know which copy is copy 2 and which is copy 3? My guess would be that copy 2 would be the SLP job to the secondary disk since SLP starts as soon as the job completes, and the vault job would be copy 3 since vault is essentially scheduled (even though our vault duplications, and backups never stop...they run 24/7/365 with no breaks other than for maintenance.) Also, is it a good idea to use both SLP and Vault to copy the same data to two different sources like that?

Thanks,

Todd 

Hi All,

Our catalog backup is getting aborted with status 42. It was working fine till yesterday.

Only catalog backup is failing & other client backups are running fine.I opened a case with symantec and waiting for their response too.

please find the below logs

02/27/2013 09:47:49 - Info nbjm (pid=22317) starting backup job (jobid=78370) for client bnymwdnb1, policy bnymwdnb1_CBT, schedule Daily
02/27/2013 09:47:49 - Info nbjm (pid=22317) requesting STANDARD_RESOURCE resources from RB for backup job (jobid=78370, request id:{A81C8348-80EC-11E2-9E2D-0021280A25EE})
02/27/2013 09:47:49 - requesting resource bnymwdnb1-hcart-robot-tld-0
02/27/2013 09:47:49 - requesting resource bnymwdnb1.NBU_CLIENT.MAXJOBS.bnymwdnb1
02/27/2013 09:47:49 - requesting resource bnymwdnb1.NBU_POLICY.MAXJOBS.bnymwdnb1_CBT
02/27/2013 09:47:50 - granted resource bnymwdnb1.NBU_CLIENT.MAXJOBS.bnymwdnb1
02/27/2013 09:47:50 - granted resource bnymwdnb1.NBU_POLICY.MAXJOBS.bnymwdnb1_CBT
02/27/2013 09:47:50 - granted resource 300366
02/27/2013 09:47:50 - granted resource IBM.ULTRIUM-TD4.002
02/27/2013 09:47:50 - granted resource bnymwdnb1-hcart-robot-tld-0
02/27/2013 09:47:50 - estimated 0 kbytes needed
02/27/2013 09:47:50 - Info nbjm (pid=22317) started backup (backupid=bnymwdnb1_1361976470) job for client bnymwdnb1, policy bnymwdnb1_CBT, schedule Daily on storage unit bnymwdnb1-hcart-robot-tld-0
02/27/2013 09:47:51 - Info bpbrm (pid=22949) bnymwdnb1 is the host to backup data from
02/27/2013 09:47:51 - Info bpbrm (pid=22949) reading file list from client
02/27/2013 09:47:51 - Info bpbrm (pid=22949) starting bpbkar on client
02/27/2013 09:47:51 - started process bpbrm (pid=22949)
02/27/2013 09:47:51 - connecting
02/27/2013 09:47:51 - connected; connect time: 0:00:00
02/27/2013 09:47:52 - Info bpbkar (pid=22957) Backup started
02/27/2013 09:47:52 - Info bpbrm (pid=22949) bptm pid: 22958
02/27/2013 09:47:53 - Info bptm (pid=22958) start
02/27/2013 09:47:53 - Info bptm (pid=22958) using 65536 data buffer size
02/27/2013 09:47:53 - Info bptm (pid=22958) using 30 data buffers
02/27/2013 09:47:53 - Info bptm (pid=22958) start backup
02/27/2013 09:47:53 - Info bptm (pid=22958) media id 300366 mounted on drive index 2, drivepath /dev/rmt/3cbn, drivename IBM.ULTRIUM-TD4.002, copy 1
02/27/2013 09:47:53 - mounted 300366
02/27/2013 09:47:53 - positioning 300366 to file 9
02/27/2013 09:47:56 - positioned 300366; position time: 0:00:03
02/27/2013 09:47:56 - begin writing
02/27/2013 10:02:15 - Warning bpbrm (pid=22949) from client bnymwdnb1: WRN - /usr/openv/netbackup/db/error/daily_messages.log is only being backed up as a symbolic link
02/27/2013 10:02:16 - Info bpbkar (pid=22957) bpbkar waited 1402 times for empty buffer, delayed 6420 times
02/27/2013 10:02:16 - Info bptm (pid=22958) waited for full buffer 30333 times, delayed 35555 times
02/27/2013 10:02:23 - Error bpbrm (pid=22949) db_flist_complete failed: events out of sequence - image inconsistency (229) bnymwdnb1 bnymwdnb1_CBT 4 1361976470
02/27/2013 10:10:37 - Error bptm (pid=22958) get_string() failed, I/O error (5), premature end of file encountered
02/27/2013 10:10:37 - Info bptm (pid=22958) EXITING with status 42 <----------
02/27/2013 10:10:42 - Info bpbkar (pid=22957) done. status: 42: network read failed
02/27/2013 10:10:42 - end writing; write time: 0:22:46
network read failed (42)

Regards,

Musthaq

We are currently in the process of putting a new media server and robot at an existing site.  The current setup is an unmanaged tape drive which is using AVR in NetBackup to create the media labels, this drive has no bardode reader and the tapes have no barcode labels on them.

The existing media server is running NBU 7.0 and Windows 2003, the new media server will be NBU 7.1.0.4 and Windows 2008 R2 (the master server in this NBU domain is running 7.1.0.4)

We would like to put in a new media server and a robot which has barcode reading capabilities and add barcode labels to all the existing tapes (most of which have valid data on them) so they can continue to be used.  The old media server and tape drive will be decomissioned.

I'm looking for a way we can do this, and keep the existing data on the tapes available for restores.

---

Firstly I believe we need to move the media from the old media server to the new one using the command below (can use bpmedialist -mlist -l -h <oldserver> to list the tapes which have valid images on them)

bpmedia  -movedb  -allvolumes   -oldserver   <decommisioned_media_server>   -newserver <media_server_inheriting_media>

Once this is done I believe I can use the vmchange command to update the media information, but I'm not sure of the exact steps required, or the order in which to do them. I am under the impression that if we simply put barcode labels on the tapes and inventory them into the new robot we will run into trouble. Lets assume one of the existing Media ID is A00015 and the new barcode label is XYZ123L4 and this tape has valid data on it that we would like to be able to easily restore if needed.

If someone can help out with this query we would appreciate it!

Many thanks

NBU Version 7.1.0.4 (Linux)

Hi all,

We are just starting to use the DB2 agent in our environment, and wanted to find out about verifying DB2 backups using the db2ckbkp command. I have read all the guides I can but haven't been able to find the information.

As per process of obtaining the DB2 backup list we run the following command - bplist -C <Client> -t 18 -l -R /

This gives us the following output.

-rw-rw-r-- db2inst1  staff      137610056K Jan 23 11:31 /DB2/TESTDB/node0000/20130123113137/TESTDB.0.db2inst1.node0000.0.20130123113137.1
 

What I want to know is if it is possible to somehow verify this image from DB2 using the db2ckbkp command?

Previously we would run the following command against an image to get the header information.

db2ckbkp -h SAMPLE2.0.TEST.NODE0000.CATN0000.19990818122909.001

=====================
   MEDIA HEADER REACHED:
   =====================
           Server Database Name           -- SAMPLE2
           Server Database Alias          -- SAMPLE2
           Client Database Alias          -- SAMPLE2
           Timestamp                      -- 19990818122909
           Database Partition Number      -- 0
           Instance                       -- test
           Sequence Number                -- 1
           Release ID                     -- 900
           Database Seed                  -- 65E0B395
           DB Comment's Codepage (Volume) -- 0
           DB Comment (Volume)            --                              
           DB Comment's Codepage (System) -- 0
           DB Comment (System)            --                              
           Authentication Value           -- 255
           Backup Mode                    -- 0
           Include Logs                   -- 0 
           Compression                    -- 0
           Backup Type                    -- 0
           Backup Gran.                   -- 0
           Status Flags                   -- 11
           System Cats inc                -- 1
           Catalog Database Partition No. -- 0
           DB Codeset                     -- ISO8859-1
           DB Territory                   --
           LogID                          -- 1074717952
           LogPath                       -- /home/db2/test/NODE0000/
                                             SQL00001/SQLOGDIR
           Backup Buffer Size             -- 4194304
           Number of Sessions             -- 1
           Platform                       -- 0

 Any help would be greatly appreciated.

any NBU command and centerilized logs, we can use for finding which servers have bpstart_notify and bpend_notify configured?

thanks in advance!

hi, ALL

i imported a backup image(NDMP image from netapp storage) and wanted to restore to EMC storage.

NBU: 7.5.0.3 running on linux

no media servers

[root@blxecnbumast ~]# /usr/openv/volmgr/bin/tpautoconf -verify  10.119.10.XXX  ====>10.119.10.XXX is EMC storage
Connecting to host "10.119.10.122" as user "ndmp"...
Waiting for connect notification message...
Opening session--attempting with NDMP protocol version 4...
Opening session--successful with NDMP protocol version 4
  host supports TEXT authentication
  host supports MD5 authentication
Getting MD5 challenge from host...
Logging in using MD5 method...
Host info is:
  host name "server_2"
  os type "DartOS"
  os version "EMC Celerra File Server.T.7.0.54.5"
  host id "abc1997"
Login was successful
Host supports LOCAL backup/restore
Host supports 3-way backup/restore

but I failed to do the restore as below:. do you have any suggestions how do I troubleshooting?

2013-2-28 18:53:20 - begin Restore
2013-2-28 18:53:21 - restoring from image fs03-backup_1361561432
2013-2-28 18:58:22 - Info bprd (pid=30208) Restoring from copy 1 of image created Fri Feb 22 14:30:32 2013
2013-2-28 18:58:22 - Info bpbrm (pid=30789) 10.119.10.122 is the host to restore to
2013-2-28 18:58:22 - Info bpbrm (pid=30789) reading file list from client
2013-2-28 18:58:22 - connecting
2013-2-28 18:58:22 - Info bpbrm (pid=30789) starting bptm
2013-2-28 18:58:23 - Info ndmpagent (pid=30798) Restore started
2013-2-28 18:58:23 - connected; connect time: 0:00:00
2013-2-28 18:58:23 - Info bpbrm (pid=30789) bptm pid: 30799
2013-2-28 18:58:23 - Info bptm (pid=30799) start
2013-2-28 18:58:23 - started process bptm (pid=30799)
2013-2-28 18:58:23 - Info bpdm (pid=30799) reading backup image
2013-2-28 19:13:35 - begin reading
2013-2-28 19:13:35 - Info ndmpagent (pid=30798) INF - Restoring NDMP files from /vol/content/ to [See line below]
2013-2-28 19:13:36 - Info ndmpagent (pid=30798) INF - Restoring NDMP files from [See line above] to /tempcontent/tempcontent
2013-2-28 19:13:37 - Info ndmpagent (pid=30798) DAR disabled - continuing restore without DAR
2013-2-28 19:13:38 - Info ndmpagent (pid=30798) Attempting normal restore.
2013-2-28 19:13:40 - Error ndmpagent (pid=30798) 10.119.10.122: Cannot identify format.
2013-2-28 19:13:41 - Info ndmpagent (pid=30798) 10.119.10.122: server_archive: emctar vol 1, 0 files, 65536 bytes read, 0 bytes written
2013-2-28 19:13:41 - Error ndmpagent (pid=30798) NDMP restore failed from path /vol/content
2013-2-28 19:13:42 - Info ndmpagent (pid=30798) done. status: 5
2013-2-28 19:13:42 - end reading; read time: 0:00:07
2013-2-28 19:13:42 - Info bptm (pid=30799) completed reading backup image
2013-2-28 19:13:42 - Info bptm (pid=30799) EXITING with status 0 <----------
2013-2-28 19:13:42 - Info ndmpagent (pid=30798) done. status: 5: the restore failed to recover the requested files
2013-2-28 19:13:42 - Error bpbrm (pid=30789) client restore EXIT STATUS 5: the restore failed to recover the requested files
2013-2-28 19:13:42 - restored from image fs03-backup_1361561432; restore time: 0:20:21
2013-2-28 19:13:43 - end Restore; elapsed time 0:20:23
NDMP policy restore error  (2813)
 

Hi all,

when I am logged on a server backed up by net backup,  I would like to check the backup server name how it was for backup exec. Is it possible? How?

Thanks in advance