Hi to everyone

Our environement is Solaris Sparc 64bit with Netbackup 7.0.1 on SunOS 5.0 (Solaris 10)

Since short time we use a VNC SAN  and want to change our Backup-Window from Daily-Full-Backups to a Rotation of Full-Backups and Cummulative-Incremental Backups.

When I controlled the first Backup-Sets, i was very shocked. The Cummulative-Incremental Backups needs not only more than twice the time as the Full Backup; they also save more than double the amount of data.

Is this a normal behaviour for a san-backup ?

As in my understanding, a Cummulative-Incremental Backup retains the differences between the last Full-Backup and the Next-Full-Backup and grows from Backup-Set to Backup-Set. But, within a Backup-Set, there ist an Automatic End. The Backup did not catch unlimited any new open files on the SAN.

Thanks for your Help

Thomas

In Our environment , we have one master server acting as media server also and two san media server and another sepaertae media server ( B).

Master servers and Media Servers : Windows 2008 R2 64bit 

San Media Server : Linux OS

And one IBM L3 library drive with 12 drives and all the 12 drives are shared for Master server and San media servers.

And only two drives for Server B and if i need to use the two drives sexplicitely  for the server B i need zoning change or i can down aother paths except B paths alone for the drives.

What is the Enterprise disk license used for ?

I'm asking this question because I want to know why do I need that license because if the VTL will appear to my windows system in the end as a tape library so why do I need a license ? or this license is to make the netbackup aware that this is a disk so that the backup operation will be just faster ?? or this is wrong and the VTL without this option will not work at all ?? 

I'm trying to find any document about the license but I failed to reach any

Thanks & Best Regards,

hi,

i m using netbackup 7.5

machine physical(v440) oralce-solaris10 client & database oracle10g release2 and virtual machines(Esx sever) oracle-solarisx86_64  master server and media server.

is some one guide me.

Hi to everyone

Our environement is Solaris Sparc 64bit with Netbackup 7.0.1 on SunOS 5.0 (Solaris 10)  with a Windows 2003  x86 Web Client

Policy is  BMR activated with two Shedules :

1th  Full -Backup

2nd Cummulative Incr Backup

The 1th Shedule runs without Probems and returns no Failure-Code on both Parts of the Backup-Job.

The 2nd Shedule succeded for the part of BMR; but after 16 minutes, the main Job for the Backup of the Directories and Files failed with a Network-Timeout.

Self a change in the Client-Settings in Netbackup could not change this Behaviour.

I know that the windows system did not have plenty of space. By this, i had expected, that the full-backups will make problems and not the differentiells.

Is there a missing or damaged file on the system ?

Many thanks for any help

Thomas

Morning all,

I'm trying to restore a few items but we're getting the error "no entity found" while browsing within the Java BAR console.

If I try to do the same within the Windows console on the master server directly, I can see all the folders and files without issue.

The Master server is running 7.5.0.1 (Java installed as well) as is my PC.

I can navigate some of the folders with the Java console but then get the "no entity found" error on other folders.

If I try to navigate the same folders which gave me the error but this time directly from the master server it then shows them and even allows me to drill down further.

I loged onto the master server with the same credentails as I do with the Java console on my PC.

Obviously as I can access the master server and restore from there it's not a mojor problem but we have a team which run with restore requests and they wouldn't have direct access to the master server, leaving them with no option but to use the JAVA console and therefore no way to restore these files.

Has anyone seen anything like this before ?

Regards

Kevin

Hello,

I'm working with a client who's using Netbackup 7.5, and they're looking at implementing SharePoint 2013.  Does Netbackup 7.5 currently support SharePoint 2013, or is there a roadmap that gives a general idea of when SharePoint 2013 will be supported by Netbackup (7.5 or later)?

Thanks!

Zach

Hi All ,

Getting the below error message while taking the flash backup of G: drive of one of the server , attaching the logs clinet log also .

NBU Master : NBU 7.0.1 / Windows 2008 R2

NBU Media : NBU 7.0.1 / Windows 2008 R2

NBU Client : NBU 7.0.1 / Windows 2003 SP2

Hello,

I have a question regarding Symantec NetBackup command line interface.

I'm trying to work with command line only from the master server host (no Admin Console is available!!).

My problem: when I use "bpbackup" command, no 'job id' is returned, so it is problematic for me to track the parent job that is created (for getting logs, aborting it etc.)

I tried to use the pid (proc id) that is shown in the log file (when running bpbackup with -L option) and then parse the bpdbjobs -all_columns output). This may work, but I noticed that the -L output is missing the pid in case it is ran from master server.

Then I tried to see if there is a way to insert some kind of description to the backup instance. I noticed that there is a -k option to set keyword (for later restore). However, the keyward phrase is not presented in the active environment (bpdbjobs).

Does anyone has an idea/tip/trick how can I retrieve the parent job id(/job id) of a backup execution command without the GUI?

Thanks,

Avner

Hi,

I am trying to install a Linux 7.1 client on a Linux client server for some reason the install won’t start,  it will go to the point where it  say’s

 “Installing PBX...

Please wait while installation is in progress...

However  the install won’t go any further (no matter how long I wait) , has anyone had this issue before?

ivapptitan3.mas.xx.xx.xx

 [root@ivapptitan3 NetBackup_7.1_CLIENTS]# ./install

Symantec Installation Script

Copyright 1993 - 2011 Symantec Corporation, All Rights Reserved.

       Installing NetBackup Client Software

Do you wish to continue? [y,n] (y) y

Do you want to install the NetBackup client software for this client? [y,n] (y)

y

This package will install Linux/RedHat2.6 client.

This package will install NetBackup client 7.1.

Enter the name of the NetBackup server : xxxxxxxxxxxxx

Would you like to use "xxxxxxxx" as the configured

name of the NetBackup client? [y,n] (y) y

Enter the name of this NetBackup client :

Installing PBX...

Please wait while installation is in progress...<<<<<This is where is stops

 [Linux ivapptitan3 2.6.18-92.el5 #1 SMP Tue Apr 29 13:16:15 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux

[[root@ivapptitan3 NetBackup_7.1_CLIENTS]# uname -r

2.6.18-92.el5

Fyi – I have done linux client installs on similar servers and no issues at all.

Thanks

Hi

I would like to get some suggestion about backing up the client which can be reached only through bastion host. The netbackup server has to login to bastion host to reach the client.

Our environment

Netbackup version 7.5.0.3

Server OS - Redhat 6.2

Client OS - centos 6.2

Anybody tried adding a VMware rule for client selection to an existing policy by the command line?

In the NBU 7.5 Commands Reference Guide there is appears to be now way of adding  VMware selection of clients using rules.  The command bpplclients normally handles this but doesn't look like it has this ability nor does any other command.

It should be a simple procedure because you can create a policy with a selection rule(s) and use that as an example and edit as required.

Hi All,

I am thinking of automating Media Unfreeze in our environment. There are couple of questions regarding this.

1. "/usr/openv/netbackup/bin/goodies/available_media | grep -i FROZEN" will give the forzen tapes. But this command is taking long time to complete. In our environment its taking around 20 minutes. Is it normally works this way? If yes, is there any other command which gives me the frozen medias?

2. What is the best way to find the media host of a particular media? "bpmedialist -m <media_id>" is not helping. Because in our environment some media are allocated to Server Group. Hence for some media, instead of "Server Host" output, I get "Server Group" output in bpmedialist command?

Will "bpmedia -unfreeze -m <media_id> -h <Server Group> works? or only "Server Host" will work? If the second is the answer, what is the other command to find the media host?

My Master Server : HP-UX 11.31

Netbackup Version: 7.1

I know instead of these, GUI or from Opscenter, it is easy to unfreeze media. But I would like to know if an automation with out any manual interaction is possible. Thanks in advance for your inputs. :)

..RAJ

Hi,

Netbackup Accelerator is excellent - we are using it along with some 5220 appliances and Netbackup 7.5 - but I do have a question about the way it works.

This rather good document covers a lot of the technical details: http://www.symantec.com/business/support/index?pag...

However, one bit of information that is missed out is exactly what data about the filesystem is stored in the track log, and how the track log is compared against the filesystem so quickly.  Does it use the same techniques on ext3 and NTFS for example?

Thank you if you have any information on this.  This question arises more out of curiosity than necessity.

Chris.

Hi

Our Linux clients were originally installed with no Liveupdate agent and we have approx x 1000, is there a way i can push the liveupdate agent to the 6.5.6 clients from a 7.5.0.4 server (or 7.1.0.4 server) ?

Thanks

Hello

  Our Sharepoint Systems consist of  1 portal and 1 database( SQL2008)  server.

Can we use Netbackup agent for SQL to backup the database of the Sharepoint System?

Or we must use only the NBU agent for sharepoint to backup the sharepoint system.

  The result of recovery is same or not.  I think the agent for sharepoint is a step more complex  (more error) than SQL

Thank you.

OS :- Red Hat Linux

Master/Media Server

All netbackup processes are not coming. How to troubleshoot further.

NB Processes
------------
root     16832     1  0 14:02 ?        00:00:00 /usr/openv/netbackup/bin/vnetd -standalone
root     16835     1  0 14:02 ?        00:00:00 /usr/openv/netbackup/bin/bpcd -standalone
root     16901     1  0 14:02 ?        00:00:01 /usr/openv/db//bin/NB_dbsrv @/usr/openv/var/global/server.conf @/usr/openv/var/global/databases.conf -hn 7
root     16979     1  0 14:02 ?        00:00:00 /usr/openv/netbackup/bin/bpcompatd
root     16985     1  0 14:02 pts/3    00:00:00 /usr/openv/netbackup/bin/bpdbm
root     17584     1  0 14:09 ?        00:00:00 /usr/openv/netbackup/bin/bpjava-susvc og88427 -1 -1 en_US /usr/openv/java/auth.conf 1 -1 17581 noUserCredentialsFile
root     17587 17584  0 14:09 ?        00:00:00 /usr/openv/netbackup/bin/bpjava-susvc og88427 -1 -1 en_US /usr/openv/java/auth.conf 1 -1 17581 noUserCredentialsFile
root     17593 17584  0 14:09 ?        00:00:00 /usr/openv/netbackup/bin/bpjava-susvc og88427 -1 -1 en_US /usr/openv/java/auth.conf 1 -1 17581 noUserCredentialsFile

MM Processes
------------
root     16965     1  0 14:02 pts/3    00:00:00 /usr/openv/volmgr/bin/ltid
root     16971     1  0 14:02 pts/3    00:00:00 vmd

Shared Symantec Processes
-------------------------
root     17280     1  0 14:02 ?        00:00:00 /opt/VRTSpbx/bin/pbx_exchange

BPRD logs

14:35:25.282 [16974] <2> ConnectionCache::connectAndCache: Acquiring new connection for host gbrhou01lx100, query type 98
14:35:25.283 [16974] <2> vnet_pbxConnect: ../../libvlibs/vnet_pbx.c.666: pbxSetAddrEx/pbxConnectEx return error 104:Connection reset by peer
14:35:25.283 [16974] <2> do_pbx_service: ../../libvlibs/vnet_connect.c.1718: 0: vnet_pbxConnect() failed: 18 0x00000012
14:35:25.283 [16974] <2> do_pbx_service: ../../libvlibs/vnet_connect.c.1719: 0: save_errno: 104 0x00000068
14:35:25.283 [16974] <2> do_pbx_service: ../../libvlibs/vnet_connect.c.1720: 0: use_vnetd: 0 0x00000000
14:35:25.283 [16974] <2> do_pbx_service: ../../libvlibs/vnet_connect.c.1721: 0: cr->vcr_service: bpdbm
14:35:25.283 [16974] <2> vnet_async_connect: ../../libvlibs/vnet_connect.c.1353: 0: do_service failed: 18 0x00000012
14:35:25.291 [16974] <2> vnet_vnetd_pbx_c_supported: ../../libvlibs/vnet_vnetd.c.3435: 0: VN_REQUEST_PBX_C_SUPPORTED: 13 0x0000000d
14:35:25.372 [16974] <2> do_vnetd_service: ../../libvlibs/vnet_connect.c.1641: 0: remote host supports PBX, but PBX is not running: 0 0x00000000
14:35:25.372 [16974] <2> vnet_vnetd_service_socket: ../../libvlibs/vnet_vnetd.c.1957: 0: VN_REQUEST_SERVICE_SOCKET: 6 0x00000006
14:35:25.372 [16974] <2> vnet_vnetd_service_socket: ../../libvlibs/vnet_vnetd.c.1971: 0: service: bpdbm
14:35:25.414 [16974] <2> vnet_pop_byte: ../../libvlibs/vnet.c.1159: 0: errno: 2 0x00000002
14:35:25.414 [16974] <2> vnet_pop_byte: ../../libvlibs/vnet.c.1161: 0: Function failed: 9 0x00000009
14:35:25.414 [16974] <2> vnet_pop_string: ../../libvlibs/vnet.c.1241: 0: Function failed: 9 0x00000009
14:35:25.414 [16974] <2> vnet_pop_signed: ../../libvlibs/vnet.c.1285: 0: Function failed: 9 0x00000009
14:35:25.414 [16974] <2> vnet_pop_status: ../../libvlibs/vnet.c.1363: 0: Function failed: 9 0x00000009
14:35:25.414 [16974] <2> vnet_vnetd_service_socket: ../../libvlibs/vnet_vnetd.c.1987: 0: status: 9 0x00000009
14:35:25.414 [16974] <2> do_vnetd_service: ../../libvlibs/vnet_connect.c.1664: 0: vnet_vnetd_service_socket failed: 9 0x00000009
14:35:25.414 [16974] <2> vnet_async_connect: ../../libvlibs/vnet_connect.c.1353: 0: do_service failed: 9 0x00000009
14:35:25.414 [16974] <2> vnet_async_connect: ../../libvlibs/vnet_connect.c.1376: 0: getsockopt SO_ERROR returned: 111 0x0000006f
14:35:26.415 [16974] <2> vnet_async_connect: ../../libvlibs/vnet_connect.c.1376: 0: getsockopt SO_ERROR returned: 111 0x0000006f
14:35:28.416 [16974] <2> vnet_async_connect: ../../libvlibs/vnet_connect.c.1376: 0: getsockopt SO_ERROR returned: 111 0x0000006f
14:35:32.417 [16974] <2> vnet_async_connect: ../../libvlibs/vnet_connect.c.1376: 0: getsockopt SO_ERROR returned: 111 0x0000006f
14:35:40.418 [16974] <2> vnet_async_connect: ../../libvlibs/vnet_connect.c.1376: 0: getsockopt SO_ERROR returned: 111 0x0000006f
14:35:40.420 [16974] <2> connect_to_service: ../../libvlibs/vnet_connect.c.382: 0: vnet_async_connect() failed: 18 0x00000012
14:35:40.420 [16974] <2> vnet_connect_to_service: ../../libvlibs/vnet_connect.c.174: 0: connect_to_service() failed: 18 0x00000012
14:35:40.420 [16974] <2> ConnectionCache::connectToBpdbm: vnet_connect_to_service(gbrhou01lx100) failed: Operation now in progress (115), vnet status 18
14:35:40.420 [16974] <2> ConnectionCache::connectAndCache: connect_to_bpdbm(gbrhou01lx100) failed status 25 err 115
14:35:40.420 [16974] <2> ConnectionCache::connectAndCache: Return value is (21)
14:35:40.420 [16974] <2> db_begin: Could not connect  and returned with exceptionNo connection established
14:35:40.420 [16974] <2> bprd: cannot contact database daemon...exiting
 

PBX is listening

bash-3.2$ netstat -a|grep pbx
tcp        0      0 *:veritas_pbx               *:*                         LISTEN
tcp        0      0 *:veritas_pbx               *:*                         LISTEN
bash-3.2$ netstat -an|grep pbx
bash-3.2$ netstat -anp|grep 1556
(Not all processes could be identified, non-owned process info
 will not be shown, you would have to be root to see it all.)
tcp        0      0 0.0.0.0:1556                0.0.0.0:*                   LISTEN      -
tcp        0      0 127.0.0.1:5167              127.0.0.1:1556              ESTABLISHED -
tcp        0      0 127.0.0.1:1556              127.0.0.1:41748             TIME_WAIT   -
tcp        0      0 13.215.68.30:1556           13.215.68.30:50202          ESTABLISHED -
tcp        0      0 127.0.0.1:1556              127.0.0.1:51737             ESTABLISHED -
tcp        0      0 127.0.0.1:1556              127.0.0.1:5167              ESTABLISHED -
tcp        0      0 13.215.68.30:1556           13.215.68.30:12072          ESTABLISHED -
tcp        0      0 127.0.0.1:1556              127.0.0.1:2615              TIME_WAIT   -
tcp        0      0 13.215.68.30:12072          13.215.68.30:1556           ESTABLISHED -
tcp        0      0 127.0.0.1:1556              127.0.0.1:55355             TIME_WAIT   -
tcp        0      0 13.215.68.30:1556           13.215.68.30:37720          ESTABLISHED -
tcp        0      0 127.0.0.1:1556              127.0.0.1:24683             TIME_WAIT   -
tcp        0      0 127.0.0.1:1556              127.0.0.1:39030             TIME_WAIT   -
tcp        0      0 127.0.0.1:1556              127.0.0.1:39028             TIME_WAIT   -
tcp        0      0 13.215.68.30:1556           13.215.68.30:49779          ESTABLISHED -
tcp        0      0 127.0.0.1:1556              127.0.0.1:39038             TIME_WAIT   -
tcp        0      0 127.0.0.1:1556              127.0.0.1:39036             TIME_WAIT   -
tcp        0      0 127.0.0.1:1556              127.0.0.1:39034             TIME_WAIT   -
tcp        0      0 127.0.0.1:1556              127.0.0.1:39032             TIME_WAIT   -
tcp        0      0 127.0.0.1:1556              127.0.0.1:39046             TIME_WAIT   -
tcp        0      0 127.0.0.1:1556              127.0.0.1:39044             TIME_WAIT   -
tcp        0      0 127.0.0.1:1556              127.0.0.1:39042             TIME_WAIT   -
tcp        0      0 127.0.0.1:1556              127.0.0.1:39040             TIME_WAIT   -
tcp        0      0 13.215.68.30:37720          13.215.68.30:1556           ESTABLISHED -
tcp        0      0 127.0.0.1:1556              127.0.0.1:39050             TIME_WAIT   -
tcp        0      0 13.215.68.30:1556           13.215.68.30:53130          ESTABLISHED -
tcp        0      0 127.0.0.1:1556              127.0.0.1:39048             TIME_WAIT   -
tcp        0      0 13.215.68.30:39669          13.215.68.30:1556           ESTABLISHED -
tcp        0      0 13.215.68.30:45815          13.215.68.30:1556           ESTABLISHED -
tcp        0      0 127.0.0.1:1556              127.0.0.1:22959             TIME_WAIT   -
tcp        0      0 127.0.0.1:1556              127.0.0.1:20935             TIME_WAIT   -
tcp        0      0 127.0.0.1:1556              127.0.0.1:35532             TIME_WAIT   -
tcp        0      0 13.215.68.30:50202          13.215.68.30:1556           ESTABLISHED -
tcp        0      0 13.215.68.30:1556           13.215.68.30:12499          TIME_WAIT   -
tcp        0      0 13.215.68.30:49779          13.215.68.30:1556           ESTABLISHED -
tcp        0      0 13.215.68.30:53225          13.215.68.30:1556           ESTABLISHED -
tcp        0      0 13.215.68.30:53130          13.215.68.30:1556           ESTABLISHED -
tcp        0      0 127.0.0.1:51737             127.0.0.1:1556              ESTABLISHED -
tcp        0      0 127.0.0.1:1556              127.0.0.1:44005             TIME_WAIT   -
tcp        0      0 13.215.68.30:1556           13.215.68.30:53225          ESTABLISHED -
tcp        0      0 127.0.0.1:1556              127.0.0.1:22006             TIME_WAIT   -
tcp        0     34 13.215.68.30:1556           13.215.68.30:45815          ESTABLISHED -
tcp        0      0 127.0.0.1:1556              127.0.0.1:60660             TIME_WAIT   -
tcp        0      0 13.215.68.30:1556           13.215.68.30:39669          ESTABLISHED -
tcp        0     24 13.215.68.30:1556           13.215.68.30:46332          ESTABLISHED -
tcp        0      0 127.0.0.1:1556              127.0.0.1:22523             TIME_WAIT   -
tcp        0      0 :::1556                     :::*                        LISTEN      -

PBX settings

Auth User:0 : root
Secure Mode: false
Debug Level: 10
Port Number: 1556
PBX service is not cluster configured

bp.conf

SERVER = gbrhou01lx100
SERVER = gbrhou01lx100.eu.xerox.net
#SERVER = usa0300as736.na.xerox.net
SERVER = usa0300as736
MEDIA_SERVER = gbrhou01lx100
CLIENT_NAME = gbrhou01lx100
USE_VXSS = PROHIBITED
VXSS_SERVICE_TYPE = INTEGRITYANDCONFIDENTIALITY
EMMSERVER = gbrhou01lx100
VXDBMS_NB_DATA = /usr/openv/db/data
CLIENT_CONNECT_TIMEOUT = 2000
CLIENT_READ_TIMEOUT = 2000
ALLOW_MEDIA_OVERWRITE = DBR
ALLOW_MEDIA_OVERWRITE = TAR
ALLOW_MEDIA_OVERWRITE = CPIO
ALLOW_MEDIA_OVERWRITE = ANSI
ALLOW_MEDIA_OVERWRITE = AOS/VS
ALLOW_MEDIA_OVERWRITE = MTF1
ALLOW_MEDIA_OVERWRITE = RS-MTF1
ALLOW_MEDIA_OVERWRITE = BE-MTF1
OPS_CENTER_SERVER_NAME = usa0300as736.na.xerox.net
#VERBOSE = 5
#CONNECT_OPTIONS = localhost 1 0 2
 

I have loaded NetBackup 7.5.0.3 on two TeleCom servers which have AntiVirus disabled.  But The NB Client Services will not start up.

I am able to ping the NB Master Server; Tried "Log OnAs" both with a Domain Account and Local Service. 

Any help would be greatly appreciated, Thank you,

~Keith

The "bmrd" log is as follows:

$Header 65543,51216,119,1355645381,18000,HCICXMREC01
0,51216,128,119,1,1355645381765,1496,1500,0:,42:vnet_connect_to_service()  failed, rc = 18,39:platform.cpp:PlatformVnetdSockConnect(),1
1,51216,128,119,2,1355645381765,1496,1500,0:,0:,24:bmrop.cpp:BmrOpProcess(),1,(749|)
0,51216,128,119,3,1355645381765,1496,1500,0:,67:BmrOps BMROP_QUERY, BMROP_DB, failed In CBmr::queryRequest. rc =200,55:CBmr::queryRequest(colClause, TableClause, WhereClause),1
2,51216,128,119,4,1355645381765,1496,1500,0:,0:,0:,2,(900|)
0,51216,128,119,5,1355645387678,1496,1500,0:,42:vnet_connect_to_service()  failed, rc = 18,39:platform.cpp:PlatformVnetdSockConnect(),1
1,51216,128,119,6,1355645387678,1496,1500,0:,0:,24:bmrop.cpp:BmrOpProcess(),1,(749|)
0,51216,128,119,7,1355645387678,1496,1500,0:,67:BmrOps BMROP_QUERY, BMROP_DB, failed In CBmr::queryRequest. rc =200,55:CBmr::queryRequest(colClause, TableClause, WhereClause),1
2,51216,128,119,8,1355645387678,1496,1500,0:,0:,0:,2,(900|)
0,51216,128,119,9,1355645393574,1496,1500,0:,42:vnet_connect_to_service()  failed, rc = 18,39:platform.cpp:PlatformVnetdSockConnect(),1
1,51216,128,119,10,1355645393574,1496,1500,0:,0:,24:bmrop.cpp:BmrOpProcess(),1,(749|)
0,51216,128,119,11,1355645393574,1496,1500,0:,67:BmrOps BMROP_QUERY, BMROP_DB, failed In CBmr::queryRequest. rc =200,55:CBmr::queryRequest(colClause, TableClause, WhereClause),1
2,51216,128,119,12,1355645393574,1496,1500,0:,0:,0:,2,(900|)
0,51216,128,119,13,1355645399471,1496,1500,0:,42:vnet_connect_to_service()  failed, rc = 18,39:platform.cpp:PlatformVnetdSockConnect(),1
1,51216,128,119,14,1355645399471,1496,1500,0:,0:,24:bmrop.cpp:BmrOpProcess(),1,(749|)
0,51216,128,119,15,1355645399471,1496,1500,0:,67:BmrOps BMROP_QUERY, BMROP_DB, failed In CBmr::queryRequest. rc =200,55:CBmr::queryRequest(colClause, TableClause, WhereClause),1
2,51216,128,119,16,1355645399471,1496,1500,0:,0:,0:,2,(900|)
0,51216,128,119,17,1355645405368,1496,1500,0:,42:vnet_connect_to_service()  failed, rc = 18,39:platform.cpp:PlatformVnetdSockConnect(),1
1,51216,128,119,18,1355645405368,1496,1500,0:,0:,24:bmrop.cpp:BmrOpProcess(),1,(749|)
0,51216,128,119,19,1355645405368,1496,1500,0:,67:BmrOps BMROP_QUERY, BMROP_DB, failed In CBmr::queryRequest. rc =200,55:CBmr::queryRequest(colClause, TableClause, WhereClause),1
2,51216,128,119,20,1355645405368,1496,1500,0:,0:,0:,2,(900|)
0,51216,119,119,1,1355645405368,1496,1500,0:,52:Error while attempting to update Boot Server Record.,21:bmrbd.cpp:SetupBoot(),1
0,51216,119,119,2,1355645405368,1496,1500,0:,118:Check whether the BMR Master server has been setup and whether Boot Server has been registered with the Master Server.,21:bmrbd.cpp:SetupBoot(),1
0,51216,119,119,3,1355645405368,1496,1500,0:,107:Failure in initializing the boot server. Check if the boot server is registered with the BMR Master Server.,17:main.cpp:Server(),1
2,51216,119,119,4,1355645405368,1496,1500,0:,0:,0:,2,(48|)

I have a Master Server connected to a SL500 Library and a Media server connected to a storage unit with a staging schedule.

Everything's running fine till a created a storage unit to my Master sever. I created it with a staging schedule and 2 days afters I've got this error :

Its look like that my second storage unit attached to my Master server has created a conflic with the media server...

I removed the storage unit on my Master server, I rebooted the 2 servers and everything is ok...no more error.

Can we have a storage unit on the master server and media server? does I need more licences? I really dont know why I've got this issue...

thanks for your help

here the log:

error 811 failed to communicate with resource requester

12/15/2012 5:34:06 AM - Info nbjm(pid=4504) starting backup job (jobid=33446) for client CL-PD-VW-PRS-DC01, policy PRESIMA_VM, schedule PRESIMA_HEBDO 
12/15/2012 5:34:08 AM - estimated 0 Kbytes needed
12/15/2012 5:34:08 AM - Info nbjm(pid=4504) started backup (backupid=CL-PD-VW-PRS-DC01_1355567647) job for client CL-PD-VW-PRS-DC01, policy PRESIMA_VM, schedule PRESIMA_HEBDO on storage unit Staging_MED01
12/15/2012 5:34:09 AM - started process bpbrm (3508)
12/15/2012 5:34:15 AM - connecting
12/15/2012 5:34:16 AM - connected; connect time: 00:00:01
12/15/2012 8:34:20 AM - Info bpbrm(pid=3508) CL-PD-VW-PRS-DC01 is the host to backup data from    
12/15/2012 8:34:20 AM - Info bpbrm(pid=3508) reading file list from client       
12/15/2012 8:34:21 AM - Info bpbrm(pid=3508) starting bpbkar32 on client        
12/15/2012 8:35:07 AM - Info bpbkar32(pid=6776) Backup started          
12/15/2012 8:35:07 AM - Info bptm(pid=3724) start           
12/15/2012 8:35:08 AM - Info bpbkar32(pid=6776) CONTINUE BACKUP received.         
failed to communicate with resource requester(811)
12/15/2012 8:35:19 AM - Critical bpbrm(pid=3508) unexpected termination of client CL-PD-VW-PRS-DC01    

I am using version 6.5 on  Unix and 7.1 on windows, I want to know how can I make a report on “Status of backups”

From the day before at 05:59:59 and then today at 06:00:00.  I want to run this every day.